+ 86 15516432285

爱游戏PT电子产品介绍

MB5x158页面悬浮液

作品简介:

作为最受认可的设备之一,它涵盖了所有的技术革新,如主磨机、分级机、辅助设备等。更耐磨、操作方便、节能环保,给您带来非金属矿粉加工的新体验。

爱游戏PT电子产品用法:

冶金、建筑、矿山、化工等。

爱游戏PT电子产品详细信息

爱游戏PT电子产品优势

  Host:

  1.Grinding roller adopts sliding bearing. Compared with rolling bearing, sliding bearing can avoid impact and dust.

  2.Concave blade track. This design is conducive to shoveling materials and converging them all together.

  3.Integral and wearable blade plate. The abrasion performance is improved and the shovel can be replaced easily.

  4.Installing temperature sensor on the upper bearing of main shaft can be easy to help discover fault.

  5.Stick wearable scaleboard inside of the volute. It can avoid abrading volute directly and reduce investment costs effectively.

  6.Mesh-type roller hanger can increase ventilation area of grinding chamber.

  7.Reducer is equipped with lubricant heating device and temperature detecting and controlling device. When the temperature is quite low, it is necessary to start heating device before grinding mill works, and the device will stop working if sensor detects the temperature of lubricant meet the requirement of operation.

  8.The flange face of upper and lower bolt holes of volute is thickened by lathing processing, which can fit sealing ring closely and avoid leakage of powder.

  Classifier:

  1.Classifier adopts hanging-type low resistance rotor whose shape like cone cage. It takes advantages of small classifying range, high classifying efficiency, low resistance and low energy consumption. Compared with sun wheel-type classifier, this classifier’ capacity is larger and its energy consumption is smaller when processing same materials and same requirements.

  2.Drive system is equipped with centralized lubricating device. It can provide oil for classifier termly and quantitatively which reduce working in high place.

  Auxiliary equipment:

  1.High Efficient powder collector. Efficient powder collector with large diameter makes powder collection efficiency higher and amount of return powder smaller. The air inlet of powder collector is stuck on wearable liner. The bottom is equipped with pneumatic discharging valve, and it can prevent air from returning effectively.

  2.Optimize pipes. Adopting square pipe between classifier and powder collector is easy for customers to make or patch it by themselves, and it can avoid the loss of resistance lost from collector inlet. Besides, air-out pipelines of powder collector are symmetric, which can ensure working condition of powder collector is same with the other. And two powder collectors can make efficiency higher.

  3.It has impulse bag filter which is beneficial for environmental protection.

  4.High efficiency blower.

工作原理

对于主框架,锥齿轮装置转动主轴。在主轴上装有滚子和环之间的材料,可以自动形成材料床。材料床被离心力压碎,该离心力来自磨削辊的旋转,然后成功地制成最终粉末。

对于分级机,变频电机转动笼型转子。不合格的粉料在重力的驱动下返回仓内再次研磨,合格的粉料在气流的陪伴下进入旋流分级机进行分离。最后,收集从气流中分离出来的最终粉末。

当混合了粉尘的气体进入集粉器后,气流的运动由直线运动变为圆周运动。气体与粉尘在旋转过程中产生离心力,相对密度大于气体的粉尘将被抛向磨壁。粉尘一旦直接接触磨壁,在向下的动量和向下的重力作用下,失去径向惯量,随着磨壁下落,直至锥底。当旋转气流落为圆锥形时,同时由于圆锥形收缩而向集尘器中心移动,切向速度越来越高,粉尘在较大的离心力作用下最终分离。

技术参数

的名字 单位 规范
主机 数量的滚筒 4
滚筒外径 毫米 500.
辊高度 毫米 270
环直径 毫米 1600
模型 Y355M1-8
权力 千瓦 132
电动机转速 r /分钟 740.
分类器 模型 yvf2 - 200 l - 4
权力 千瓦 30.
电动机转速 r /分钟 1480
鼓风机 模型 yx3 - 315 m - 4
权力 千瓦 132
电动机转速 r /分钟 1480
脉冲除尘器 能力 m³/小时 8500
过滤面积 平衡 91
权力 千瓦 7.5
振动给料机 模型 GZ3F
权力 千瓦 0.2